Enhance Repel moisture repellents protect architectural surfaces without leaving a glossy membrane. Repel 1 is designed for cementious materials.

 

Repel 2 can be applied to coated or uncoated surfaces, like this exterior tile floor.


REPEL 1 – ESC-0071 (MOISTURE REPELLENT)

REPEL 1 is a fast acting eco-safe clear repellent. The prime product function is surface protection for stone, brick, masonry, and concrete. Ideal for architectural or aging structures, REPEL 1 creates a breathable barrier that leaves no glossy or silicone type membrane.


USES:

  • where breathable sealer required
  • to retard moss and algae growth
  • for freeze-thaw damage protection
  • to reduce maintenance costs
  • sacrificial coating for graffiti
  • horizontal and vertical applications
  • interior and exterior surfaces

PREPARATION & APPLICATION :

Surface should be clean, dry, and free of contaminants. Apply by brush, roller, or low pressure airless spray. Ensure even coats and allow time for penetration. Within minutes REPEL 1 will start to cure and act as a repellent even to itself preventing further application.

Coverage: Repel - ESC-0071
Concrete 150-300 sq ft/gal
Masonry 200-400 sq ft/gal
Anti-Graffiti 100-250 sq ft/gal

REPEL 2 – ESC-0072 (MOISTURE REPELLENT)

REPEL 2 is a fast acting eco-safe clear repellent designed to provide protection of both coated and uncoated surfaces. REPEL 2 creates a breathable barrier that leaves no glossy or silicone type membrane.

Coverage: Repel - ESC-0072
All Surfaces 200-600 sq ft/gal